Dell Force10 S2410-01-10GE-24P Command Reference Manual page 156
Sftos command reference
Hide thumbs
Also See for Force10 S2410-01-10GE-24P:
- Configuration manual (306 pages) ,
- Manual (42 pages) ,
- Quick start manual (31 pages)
Table of Contents
Advertisement
Command
History
Example
Related
Commands
|
VLAN Commands
156
Version 2.5.2
Unsupported: This command was not tested in SFTOS 2.5.2, so is not supported
Version 2.5.1
Unsupported: This command was not tested in SFTOS 2.5.1, so is not supported
Version 2.3.1.9
Introduced
Figure 7-53. Example of Use of show dvlan-tunnel l2pdu-forwarding Command
Force10 S50 #show dvlan-tunnel l2pdu-forwarding
L2Pdu-Forwarding Mode: enabled.
L2Pdu-Forwarding Mac: 01:01:E8:00:00:00
dvlan-tunnel l2pdu-forwarding enable
dvlan-tunnel l2pdu-forwarding
mac-address
mode dvlan-tunnel
Enable/disable the l2pdu-forwarding mode.
Set/clear the l2pdu-forwarding MAC address.
Enable Double VLAN Tunneling on the specified interface.
- Quick Links:
- Quick Starting the Switch
Hide quick links:
Advertisement
Table of Contents
