gmrp interfacemode enable all
Syntax
Default
Mode
Command
History
Related
Commands
set gmrp interfacemode
Default
Syntax
Mode
Command
History
Related
Commands
|
GARP Commands
258
This command enables GARP Multicast Registration Protocol (GMRP) on all interfaces. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently
be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
gmrp interfacemode enable all
Use no gmrp interfacemode enable all to disable GARP Multicast Registration Protocol on all
interfaces.
disabled
Global Config
Version 2.5.2
Unsupported: not tested in v.2.5.2
Version 2.5.1
Unsupported: not tested in v.2.5.1
Version 2.3
Changed from
show gmrp configuration
gmrp interfacemode enable (LAG)
This command enables GARP Multicast Registration Protocol on a selected interface. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG),
GARP functionality will be disabled on that interface. GARP functionality will subsequently be
re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
disabled
set gmrp interfacemode
Use no set gmrp interfacemode to disable GARP Multicast Registration Protocol on a selected
interface.
Interface Config
Version 2.5.2
Unsupported: not tested in v.2.5.2
Version 2.5.1
Unsupported: not tested in v.2.5.1
show gmrp configuration
set gmrp interfacemode all
Display GARP Multicast Registration Protocol information for one
or all interfaces.
Enable GMRP on the selected LAG.
Display GARP Multicast Registration Protocol information for one or all
interfaces.
; revised syntax.