Dell Force10 S2410-01-10GE-24P Command Reference Manual page 52

Sftos command reference
Hide thumbs Also See for Force10 S2410-01-10GE-24P:
Table of Contents

Advertisement

Example 2
|
System Management Commands
52
Table 5-7. Fields in Output of show interface ethernet switchport Command
Field
Transmit Packets Discarded
Most Address Entries Ever Used
Address Entries Currently in Use
Maximum VLAN Entries
Most VLAN Entries Ever Used
Static VLAN Entries
Dynamic VLAN Entries
VLAN Deletes
Time Since Counters Last Cleared
Figure 5-13. Example of show interface ethernet unit/slot/port Output (truncated)
(Force10) #show interface ethernet 1/0/1
Type........................................... Normal
Admin Mode..................................... Enable
Physical Mode.................................. Auto
Physical Status................................ Up
Speed.......................................... 1 Gig
Link Status.................................... Up
MAC Address.................................... 0001.E8D5.A0F8
Total Packets Received (Octets)................ 15508603844
Packets Received > 1522 Octets................. 0
Packets RX and TX 64 Octets.................... 0
Packets RX and TX 65-127 Octets................ 216200946
Packets RX and TX 128-255 Octets............... 2441
{More}
The show interface ethernet display fields, when the argument is unit/slot/port, are as follows:
Table 5-8. Fields in Output of show interface ethernet unit/slot/port Command
Field
Packets Received
Type
Admin Mode
Physical Mode
Description
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their
being deliverable to a higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
The highest number of Forwarding Database Address Table
entries that have been learned by this switch since the most recent
reboot
The number of Learned and static entries in the Forwarding
Database Address Table for this switch
The maximum number of Virtual LANs (VLANs) allowed on this
switch
The largest number of VLANs that have been active on this switch
since the last reboot
The number of presently active VLAN entries on this switch that
have been created statically
The number of presently active VLAN entries on this switch that
have been created by GVRP registration
The number of VLANs on this switch that have been created and
then deleted since the last reboot
The elapsed time, in days, hours, minutes, and seconds, since the
statistics for this switch were last cleared
Description
Indicates current type of use of the port, such as "PC Mbr" to
indicate port channel member, "Mirror" to indicate source port for
port-mirroring, "Probe" to indicate destination port for mirroring,
and, most commonly, "Normal".
Whether the port is administratively enabled or disabled
Whether the port is physically up or down

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10

Table of Contents