Dell Force10 S2410-01-10GE-24P Command Reference Manual page 348

Policy Type
Incompatibilities
class
Syntax
Mode
conform-color
Syntax
Mode
drop
Syntax
Mode
| Quality of Service (QoS) Commands
348
Out
Expedite (all forms)
This command creates an instance of a class definition within the specified policy for the purpose of
defining treatment of the traffic class through subsequent policy attribute statements. Note that this
command causes the specified policy to create a reference to the class definition.
Note:
The CLI mode is changed to Policy Class mode ("Policy-classmap Config") when this
command is successfully executed.
The no version of this command deletes the instance of a particular class and its defined treatment
from the specified policy. Note that this command removes the reference to the class definition for the
specified policy.
[no] class
classname
The classname is the name of an existing DiffServ class.
Policy Map (The prompt is "(Config-policy-map)#")
This command is used to enable color-aware traffic policing and define the conform-color and
exceed-color class maps used. Use in conjunction with the police-simple command where the fields
for the conform level are specified.
The no version of this command disables the color-aware traffic policing and mapping.
conform-color
class-map-name
no conform-color
The parameter is the name of an existing Diffserv class map, where different
class-map-name
ones must be used for the conform and exceed colors.
Policy Class (The prompt is "(Policy-classmap Config)#".)
This command specifies that all packets for the associated traffic stream are to be dropped at ingress.
drop
Policy Class (The prompt is "(Policy-classmap Config)#".)
[exceed-color class-map-name ]