Show Diffserv Service Brief - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example Figure 20-120. Example of Output from the show diffserv service Command
Force10 #show diffserv service 1/0/1 in
DiffServ Admin mode............................ Enable
Interface...................................... 1/0/1
Direction...................................... In
No policy is attached to this interface in this direction.
Report Fields When a policy is attached to the designated interface, the fields in the report are:
DiffServ Admin Mode—The current setting of the DiffServ administrative mode. An attached policy is
only in effect on an interface while DiffServ is in an enabled mode.
Interface—Valid unit, slot and port number separated by forward slashes.
Direction—The traffic direction of this interface service, either in or out
Operational Status—The current operational status of this DiffServ service interface
Policy Name—The name of the policy attached to the interface in the indicated direction
Policy Details—Attached policy details, whose content is identical to that described for the show
policy-map

show diffserv service brief

This command displays all interfaces in the system to which a DiffServ policy has been attached.
show diffserv service brief [in]
Syntax
This version of SFTOS only supports the ingress direction, so the report lists the same information
whether or not the in direction parameter is specified.
Mode
Privileged Exec
DiffServ Mode—The current setting of the DiffServ administrative mode. An attached policy is only
Report Fields
active on an interface while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those interfaces configured with
an attached policy are shown):
Interface—Valid unit, slot and port number separated by forward slashes.
Direction—The traffic direction of this interface service, either in or out
OperStatus—The current operational status of this DiffServ service interface
Policy Name—The name of the policy attached to the interface in the indicated direction
command (content not repeated here for brevity)
policymapname
Quality of Service (QoS) Commands | 361