Show Memory; Show Msglog - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Related
show mac-address-table
Commands

show memory

The output from this command displays current memory usage in bytes, in tabular format.
show memory
Syntax
Mode Privileged Exec
Example Figure 5-18. Example of Output from the show memory Command
(Force10) #show memory
Total Memory (b)
31326208
Usage This command shows the entire system memory usage, including tasks created by the operating system
and the application layer (SFTOS). In contrast, show process cpu shows only memory used by
application tasks.
Command
Version 2.5.1
History
Related
show process cpu
Commands
show tech-support

show msglog

Command
Version 2.3
History
Related
show logging traplogs
Commands
show logging eventlog
show logging
show logging hosts
Depending on selected display parameters, displays various Multicast
Forwarding Database (MFDB) information, including GMRP or IGMP
Snooping entries in the table.
Used Memory (b)
12738560
Introduced
Displays current CPU usage in percentage and a list of all currently running
tasks, along with their individual CPU usage.
Displays the output of many
traplogs
Deprecated: The keyword
information that had been available through this command.
Displays the SNMP trap log maintained by the switch.
Displays a combination of the system log and event log (buffered log).
Displays buffered logging (the System log)
Displays configured logging hosts (syslog servers.
Free Memory (b)
18587648
show
commands, including this one.
show logging
in the command
System Management Commands | 63
provides the