Show Lldp Neighbors - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example
Related
Commands

show lldp neighbors

Syntax
Parameters
Default
Mode
Command
History
| Link Layer Discovery Protocol (LLDP) Commands
166
Figure 8-58. Example Output from show lldp interface Commands
Force10 #show lldp interface 1/0/1
LLDP Interface Configuration
Interface Link Transmit
--------- ------ --------
1/0/1 Down Disabled
TLV Codes: 0- Port Description,
2- System Description, 3- System Capabilities
Force10 #show lldp interface all
LLDP Interface Configuration
Interface Link Transmit
--------- ------ --------
1/0/1 Down Disabled
1/0/2 Down Disabled
1/0/3 Down Disabled
1/0/4 Down Disabled
1/0/5 Down Disabled
----------!output truncated!-----------------------
lldp mode (global) Enable/disable LLDP globally.
lldp mode (interface) Enable/disable LLDP on a selected interface.
clear lldp neighbors Clear LLDP neighbor information.
Display LLDP statistics.
show lldp neighbors {all | interface unit/slot/port]In an SVL system, the [fdbid/all] parameter is
not used and will be ignored if entered.
interface unit/slot/port
all
none
Privileged Exec
Version 2.5.1 Introduced
Receive Notify TLVs
-------- -------- -------
Disabled Disabled
1- System Name
Receive Notify TLVs
-------- -------- -------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
For a particular interface, enter its ID in
Retrieve information for the system.
Mgmt
----
N
Mgmt
----
N
N
N
N
N
f
unit/slot/port
ormat.