Default
Mode
Command
History
ip telnet server enable
Syntax
Mode
Command
History
Related
Commands
session-limit
Syntax
Default
Mode
session-timeout
Syntax
|
System Management Commands
72
The time is a decimal value from 1to 160.
The no ip telnet timeout command sets the Telnet connection session timeout value, in minutes, to
the default.
5 (minutes)
Global Config
Version 2.3
Changed from
Config.
Enable or disable Telnet services.
[no] telnet server enable
Global Config
Version 2.3
Modified: Moved from Privileged Exec mode to Global Config mode.
ip ssh server enable
Enable/disable SSH services.
This command specifies the maximum number of simultaneous outbound telnet sessions. A value of 0
indicates that no outbound telnet session can be established.
session-limit 0-5
Use no session-limit to set the maximum number of simultaneous outbound telnet sessions to the
default value.
5
Line Config
This command sets the outbound Telnet session timeout value.
[no] session-timeout 1-160
The timeout value unit of time is minutes.
The no version of this command sets the outbound Telnet session timeout value to the default.
telnetcon timeout
and moved from Privileged Exec mode to Global