OSPFv3 Commands
ipv6 ospf status
Enables or disables the OSPFv3 administrative status for the router.
ipv6 ospf status {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
The OSPFv3 protocol should be enabled to route traffic.
Examples
-> ipv6 ospf status enable
-> ipv6 ospf status disable
Release History
Release 6.1.3; command was introduced.
Related Commands
show ipv6 ospf
MIB Objects
ospfv3GeneralGroup
ospfv3AdminStat
OmniSwitch CLI Reference Guide
Enables OSPFv3.
Disables OSPFv3.
default
enable
Displays OSPFv3 status and general configuration parameters.
June 2012
page 23-3