show rep topology
To display REP topology information for a segment or for all segments, including the primary and secondary
edge ports in the segment, use the show rep topology command in privileged EXEC mode.
show rep topology [segment segment-id] [archive] [detail]
Syntax Description
segment segment-id
archive
detail
Command Modes
Privileged EXEC (#)
Command History
Release
Cisco IOS XE Denali 16.2.2
Examples
The following is sample output from the show rep topology command.
Device#
REP Segment 1
BridgeName
---------------- ---------- ---- ----
10.64.106.63
10.64.106.228
10.64.106.228
10.64.106.67
10.64.106.67
10.64.106.63
REP Segment 3
BridgeName
---------------- ---------- ---- ----
10.64.106.63
SVT_3400_2
SVT_3400_2
10.64.106.68
10.64.106.68
10.64.106.63
show rep topology
PortName
Edge Role
Te5/4
Pri
Te3/4
Te3/3
Te4/3
Te4/4
Te4/4
Sec
PortName
Edge Role
Gi50/1
Pri
Gi0/3
Gi0/4
Gi40/2
Gi40/1
Gi50/2
Sec
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
Open
Open
Open
Open
Alt
Open
Open
Open
Open
Open
Open
Alt
show rep topology
(Optional) Specifies the segment
for which to display REP topology
information. The ID range is from
1 to 1024.
(Optional) Displays the previous
topology of the segment. This
keyword is useful for
troubleshooting a link failure.
(Optional) Displays detailed REP
topology information.
Modification
This command was introduced
349