Show Rep Topology - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show rep topology

Use the show rep topology User EXEC command to display Resilient Ethernet Protocol (REP) topology
information for a segment or for all segments, including the primary and secondary edge ports in the
segment.
Syntax Description segment-id
archive
detail
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(40)SE
Usage Guidelines In the show rep topology command output, ports configured as edge no-neighbor are designated with
an asterisk (*) in front of Pri or Sec. In the output of the show rep topology detail command,
No-Neighbor is spelled out.
The output of this command is also included in the show tech-support privileged EXEC command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1
sw3_multseg_3400 Gi0/13
sw3_multseg_3400 Gi0/14
sw4_multseg_3400 Gi0/13
sw4_multseg_3400 Gi0/14
sw5_multseg_3400 Gi0/13
OL-9640-10
show rep topology [segment segment_id] [archive] [detail] [ | {begin | exclude | include}
expression]
(Optional) Display REP topology information for the specified segment. The ID
range is from 1 to 1024.
(Optional) Display the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
(Optional) Display detailed REP topology information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
PortName Edge Role
Pri Alt
Open
Alt
Open
Open
Open
Cisco ME 3400 Ethernet Access Switch Command Reference
show rep topology
2-563