Show Ip Sla Application - Cisco Nexus 7000 Series Command Reference Manual

show ip sla application

show ip sla application
To display global information about the Cisco NX-OS IP Service Level Agreements (SLAs) application,
use the show ip sla application command.
Syntax Description This command has no arguments or keywords.
Command Default
Displays output for all running IP SLAs operations.
Command Modes
User EXEC
Privileged EXEC
Command History Release
6.1(1)
Usage Guidelines
Use the show ip sla application command to display information such as the supported operation types
and supported protocols.
This command does not require a license.
Examples
This example shows how to display information about the IP SLA application:
switch# show ip sla application
IP Service Level Agreements
Version: Round Trip Time MIB 2.2.0, Infrastructure Engine-III
Supported Operation Types:
Supported Features:
IP SLAs low memory water mark: 82503446
Estimated system max number of entries: 60427
Estimated number of configurable operations: 60417
Number of Entries configured
Number of active Entries
Number of pending Entries
Number of inactive Entries
Time of last change in whole IP SLAs: 02:43:20 UTC Fri Apr 13 2012
switch#
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-44
show ip sla application
Modification
This command was introduced.
udpEcho, tcpConnect, udpJitter
Chapter 1
: 10
: 4
: 0
: 6
Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03