Show Fcsp - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show fcsp

To display the status of the Fibre Channel Security Protocol (FC-SP) configuration, use the show fcsp
commands.
Syntax Description
asciiwwn ascii-wwn
dhchap
database
interface
fc slot/port
fcip interface-number
statistics
wwn
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.3(1)
Usage Guidelines
None.
Examples
The following example displays DHCHAP configurations in FC interfaces.
switch# show fcsp interface fc1/9
fc1/9:
The following example displays DHCHAP statistics for a FC interfaces.
switch# show fcsp interface fc1/9 statistics
fc1/9:
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show fcsp [asciiwwn ascii-wwn | dhchap [database] | interface fc slot/port [statistics | wwn] | fcip
interface-number [statistics | wwn]]
Displays the ASCII representation of the WWN used with AAA server.
Displays the DHCHAP hash algorithm status.
Displays the contents of the local DHCHAP database.
Displays the FC-SP settings for a FC or FCIP interface.
Displays the Fibre Channel interface in the specified slot and port.
Displays the description of the specified FCIP interface. The range is 1 to
255.
Displays the statistics for the specified interface.
Displays the FC-SP identity of the other device.
Modification
This command was introduced.
fcsp authentication mode:SEC_MODE_ON
Status: Successfully authenticated
fcsp authentication mode:SEC_MODE_ON
Status: Successfully authenticated
Statistics:
FC-SP Authentication Succeeded:5
Cisco MDS 9000 Family Command Reference
show fcsp
22-103