To return from privileged EXEC mode to user EXEC mode, enter the disable command.
Global Configuration Mode
Global configuration commands apply to features that affect the ATM module as a whole.
Use the configure privileged EXEC command to enter global configuration mode. The
default is to enter commands from the management console.
When you enter the configure command, the console prompts you for the source of the
configuration commands:
ATM# configure
Configuring from terminal, memory, or network [terminal]?
You can specify either the terminal or NVRAM as the source of configuration commands.
The following example shows you how to access global configuration mode:
ATM# configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Command Reference B-5