Fabric-Binding Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fabric-binding enable

To enable fabric binding in a VSAN, use the fabric-binding enable command. To disable fabric binding,
use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
1.3(1)
3.0(1)
NX-OS 4.1(1b)
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both both FICON VSANs
and Fibre Channel VSANs.
The fabric binding feature must be enabled in each switch in the fabric that participate in the fabric
binding.
Examples The following examples enables fabric binding on that switch.
switch# config t
switch(config)# fabric-binding enable
The following example disables fabric binding on that switch.
switch# config t
switch(config)# no fabric-binding enable
Related Commands Command
fabric-binding activate
fabric-binding database
OL-18089-01, Cisco MDS NX-OS Release 4.x
fabric-binding enable
no fabric-binding enable
Modification
This command was introduced.
Extended support of fabric binding to Fibre Channel VSANs.
This command was deprecated.
Description
Activates fabric-binding.
Configures a fabric-binding database.
Cisco MDS 9000 Family Command Reference
fabric-binding enable
8-9