Show Ntp Statistics - Cisco Nexus 7000 Series Reference Manual

Show Commands

show ntp statistics

To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.
Syntax Description
io
local
memory
peer
ipaddr address Displays statistics for the peer with the configured IPv4 or IPv6 address. The IPv4
name name
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to displays statistics for NTP:
switch(config)# show ntp statistics local
Related Commands Command
clear ntp statistics
OL-25806-03
show ntp statistics {io | local | memory | peer {ipaddr address | name name1 [..namen]}
Displays the input-output statistics.
Displays the counters maintained by the local NTP.
Displays the statistics counters related to the memory code.
Displays the per-peer statistics counter of a peer.
address format is dotted decimal, x.x.x.x. The IPv6 address format is hex A:B::C:D.
Displays statistics for one or more named peers.
Modification
This command was introduced.
Description
Clears NTP statistics.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show ntp statistics
577