Show Ntp Statistics - Cisco Nexus 3548 Command Reference Manual

System Management Commands

show ntp statistics

To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.
Syntax Description
io
local
memory
peer
ipaddr address
name name1
..nameN
Command Default
None
Command Modes EXEC mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to display the statistics for NTP:
switch# show ntp statistics local
Related Commands Command
clear ntp statistics
OL-27851-02
show ntp statistics {io | local | memory | peer {ipaddr address | name name1 [..nameN]}
Displays the input-output statistics.
Displays the counters maintained by the local NTP.
Displays the statistics counters related to the memory code.
Displays the per-peer statistics counter of a peer.
Displays statistics for the peer with the configured IPv4 address. The IPv4
address format is dotted decimal, x.x.x.x.
Displays statistics for a named peer.
(Optional) Displays statistics for one or more named peers.
Modification
This command was introduced.
Description
Clears NTP statistics
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
show ntp statistics
163