Show Logging Onboard - Cisco Nexus 7000 Series Reference Manual

show logging onboard

show logging onboard
To display the onboard logging information based on the error type, use the show logging onboard
command.
Syntax Description
boot-uptime
device-version
counter-stats
endtime
environmental-history Displays the OBFL environmental history.
error-stats
exception-log
interrupt-stats
kernel-trace
module num
obfl-history
obfl-logs
stack-trace
starttime
status
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
4.0(2)
Cisco Nexus 7000 Series NX-OS System Management Command Reference
542
show logging onboard {boot-uptime | device-version | counter-stats | endtime |
environmental-history | error-stats | exception-log | interrupt-stats | kernel-trace | module
num | obfl-history | obfl-logs | stack-trace | starttime | status}
Displays the OBFL boot and uptime information.
Displays the OBFL device version information.
(Optional) Displays the OBFL counter statistics.
Displays the OBFL logs until the specified end time.
Displays the OBFL error statistics.
Displays the OBFL exception log.
Displays the OBFL interrupt statistics.
Displays the OBFL kernel trace information.
Displays the OBFL information for a specific module.
Displays the OBFL history information.
Displays the OBFL tech support log information.
Displays the OBFL kernel stack trace information.
Displays the OBFL logs from the specified start time.
Displays the OBFL status enable/disable.
Modification
This command was introduced.
Added the counter-stats keyword.
Show Commands
OL-25806-03