Show Logging Onboard - Cisco ME 3800X Command Reference Manual

Chapter

show logging onboard

To display the on-board failure logging (OBFL) information, use the show logging onboard command
in privileged EXEC mode.
Syntax Description module [slot-number]
clilog
environment
message
temperature
uptime
voltage
continuous
summary
start hh:mm:ss day month
year
end hh:mm:ss day month year (Optional) Displays the data up to the specified time and date. For more
detail
| begin
| exclude
| include
expression
Defaults There is no default.
Command Modes
Privileged EXEC
Command History Release
12.2(52)EY
OL-28238-01
show logging onboard [module [slot-number]] [clilog | environment | message |temperature |
uptime | voltage] [continuous | detail | summary] [start hh:mm:ss day month year] [end
hh:mm:ss day month year]} [ | {begin | exclude | include} expression]
Modification
This command was introduced.
(Optional) The module slot number is always 1 and is not relevant for
the switch.
Displays the OBFL CLI commands that were entered on the switch.
Displays the unique device identifier (UDI) information for the switch
and for all the connected devices: the product identification (PID), the
version identification (VID), and the serial number.
Displays the hardware-related system messages generated by the
switch.
Displays the temperature of the switch.
Displays the time when the switch starts, the reason the switch restarts,
and the length of time the switch has been running since it last
restarted.
Displays the system voltages of the switch.
(Optional) Displays the data in the continuous file. For more
information, see the "Usage Guidelines" section.
(Optional) Displays the data in the summary file. For more information,
see the "Usage Guidelines" section.
(Optional) Displays the data from the specified time and date. For more
information, see the "Usage Guidelines" section.
information, see the "Usage Guidelines" section.
(Optional) Displays both the continuous and summary data.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Cisco ME 3800X and ME 3600X Switch Command Reference
show logging onboard
-97