Show Logging Logfile - Cisco Nexus 7000 Series Reference Manual

Show Commands

show logging logfile

To display the messages in the log file that were timestamped within the span entered, use the show
logging logfile command.
Syntax Description start-time
end-time
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines If you do not enter an end time, the current time is used.
This command does not require a license.
Examples This example shows how to display the messages in the log file that were timestamped within the span
shown:
switch# show logging logfile start-time 2008 mar 11 12:10:00
switch#
Related Commands Command
logging logfile
OL-25806-03
show logging logfile [start-time yyyy mmm dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss]
(Optional) Specifies to enter a start time in the format yyyy mmm dd hh:mm:ss.
Use three characters for the month (mmm) field, digits for the year (yyyy) and day
(dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
(Optional) Specifies to enter an end time in the format yyyy mmm dd hh:mm:ss.
Use three characters for the month (mmm) field, digits for the year (yyyy) and day
(dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
Modification
This command was introduced.
Description
Configures logging to a log file.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show logging logfile
537