Show Logging Logfile - Cisco Nexus 3548 Command Reference Manual

show logging logfile

show logging logfile
To display the messages in the log file that were timestamped within the span entered, use the show
logging logfile command.
Syntax Description start-time yyyy mmm
dd hh:mm:ss
end-time yyyy mmm dd
hh:mm:ss
Command Default None
Command Modes EXEC mode
Command History Release
5.0(3)A1(1)
Usage Guidelines If you do not enter an end time, the current time is used.
Examples
This example shows how to display the messages in the log file that were timestamped within the span
shown:
switch# show logging logfile start-time 2008 mar 11 12:10:00
Related Commands Command
logging logfile
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
144
show logging logfile [start-time yyyy mmm dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss]
(Optional) Specifies a start time in the format yyyy mmm dd hh:mm:ss. Use
three characters for the month (mmm) field, digits for the year (yyyy) and day
(dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
(Optional) Specifies an end time in the format yyyy mmm dd hh:mm:ss. Use
three characters for the month (mmm) field, digits for the year (yyyy) and day
(dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
Modification
This command was introduced.
Description
Configures logging to a log file.
System Management Commands
OL-27851-02