Show Policy-Map Interface Brief - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show policy-map interface brief

To display policy maps applied to interfaces in a brief format, use the show policy-map interface brief
command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples
This example shows how to display assigned policy maps in a brief format:
switch(config)# show policy-map interface brief
Interface/VLAN [Status]:INP QOS
================================================================================
port-channel5
port-channel20
port-channel30
port-channel37
port-channel50
Ethernet2/2
Ethernet2/3
==================================================================================
OL-23378-01
show policy-map interface brief
Modification
This command was introduced.
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
OUT QOS INP QUE
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
show policy-map interface brief
OUT QUE
QOS-101