Show Policy-Map - Cisco Catalyst 3550 Command Reference Manual

show policy-map

show policy-map
Use the show policy-map user EXEC command to display quality of service (QoS) policy maps, which
define classification criteria for incoming traffic. Policy maps can include policers that specify the
bandwidth limitations and the action to take if the limits are exceeded.
Syntax Description policy-map-name
class class-map-name
| begin
| exclude
| include
expression
Note Though visible in the command-line help string, the interface keyword is not supported, and the
statistics shown in the display should be ignored.
Command Modes
User EXEC
Command History Release
12.1(4)EA1
12.1(6)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3550 Multilayer Switch Command Reference
2-346
show policy-map [policy-map-name [class class-map-name]] [ | {begin | exclude | include}
expression]
(Optional) Display the specified policy-map name.
(Optional) Display QoS policy actions for an individual class.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The class keyword was added.
Chapter 2 Cisco IOS Commands
78-11195-09