Show Policy-Map Interface - Cisco Nexus 7000 Series Command Reference Manual

show policy-map interface

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show policy-map interface
To display policy maps and statistics for the interfaces, use the show policy-map interface command.
Syntax Description ethernet
slot/port
port-channel
channel-number
input
output
type
qos
queuing
Defaults
None.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines
By default, statistics are set to On.
This command does not require a license.
Examples This example shows how to display policy maps that are assigned to a specified interface:
switch(config)# show policy-map interface ethernet 2/10
Global statistics status :
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-98
show policy-map interface [ethernet {slot/port} | port-channel {channel-number}] [input |
output] [type {qos | queuing}]
(Optional) Specifies the policy maps that are assigned to Ethernet
interfaces.
Policy maps that are assigned to a specified interface.
(Optional) Specifies the policy maps that are assigned to port channels.
Policy maps that are assigned to specified port channel.
(Optional) Displays policy maps that are assigned to input traffic only.
(Optional) Displays policy maps that are assigned to output traffic
only.
(Optional) Specifies the component type to display.
Specifies the policy maps of the type qos only.
Specifies the policy maps of the type queuing only.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
enabled
OL-23378-01