Show System Cores - Cisco Nexus 7000 Reference

Cisco Nexus 7000 Series NX-OS High Availability Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

show system cores

To display the core filename, use the show system cores command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
To configure the system core filename, use the show system cores command.
This command does not require a license.
Examples This example shows how to display the core filename:
switch(config)# show system cores
Cores are transferred to slot0:
switch(config)#
Related Commands Command
system cores
OL-23374-01
show system cores
Modification
This command was introduced.
Description
Configures the system core filename.
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
show system cores
HACR-13