System Cores - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

system cores

To enable copying the core and log files periodically, use the system cores command in configuration
mode. To revert the switch to factory defaults, use the no form of the command.
Syntax Description
slot0
tftp:
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
Create any required directory before issuing this command. If the directory specified by this command
does not exist, the switch software logs a syslog message each time a copy cores is attempted.
Examples The following example enables periodic copying core and log files.
switch# config terminal
switch(config)# system cores slot0:coreSample
The following example disables periodic copying core and log files.
switch(config)# no system cores
Related Commands Command
show system cores
OL-16217-01, Cisco MDS SAN-OS Release 3.x
system cores {slot0: | tftp:}
no system cores
Selects the destination file system.
Selects the destination file system.
Modification
This command was introduced.
Description
Displays the currently configured scheme for copying cores.
Cisco MDS 9000 Family Command Reference
system cores
21-85