Show File - Cisco Catalyst 2950 Command Reference Manual

show file

show file
Use the show file privileged EXEC command to display a list of open file descriptors, file information,
and file system information.
show file {descriptors | information {device:}filename | systems} [ | {begin | exclude |
include} expression]
Syntax Description descriptors
information
device:
filename
systems
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.0(5.2)WC(1)
12.1(6)EA2
Usage Guidelines
File descriptors are the internal representations of open files. You can use this command to see if another
user has a file open.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show file descriptors command:
Switch# show file descriptors
File Descriptors:
FD
0
1
Table 2-17
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-332
Display a list of open file descriptors.
Display file information.
Device containing the file. Valid devices include the switch flash memory.
Name of file.
Display file system information.
(Optional) Display begins with the line that matches the specified expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The descriptors and information keywords were added.
Position Open PID Path
187392 0001 2 tftp://temp/hampton/c2950g.a
184320 030A 2 flash:c2950-i-m.a
describes the fields in the show file descriptors command output.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01