Show Logging File - Cisco 300 Series Cli Manual

Syslog Commands
78-21075-01 Command Line Interface Reference Guide
Management ACL
Aggregation: Disabled.
Aggregation aging time: 300 Sec
01-Jan-2010 05:29:46 :%INIT-I-Startup: Warm Startup
01-Jan-2010 05:29:02 :%LINK-I-Up:
01-Jan-2010 05:29:02 :%LINK-I-Up:
01-Jan-2010 05:29:02 :%LINK-I-Up:
01-Jan-2010 05:29:00 :%LINK-W-Down:

20.14 show logging file

Use the show logging file Privileged EXEC mode command to display the logging
status and the SYSLOG messages stored in the logging file.
Syntax
show logging file
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays the logging status and the SYSLOG messages
stored in the logging file.
switchxxxxxx# show logging file
Logging is enabled.
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 61 Logged, 61 Displayed, 200 Max.
Deny
Vlan 1
SYSLOG6
SYSLOG7
SYSLOG8
Enabled
20
299