Table of Contents
Advertisement
User Guidelines
In an Access-Request, encrypted passwords are sent using the RSA Message
Digest algorithm (MD5).
If no encryption parameter (7) is present, the key string is interpreted as an
unencrypted shared secret.
Keys are always displayed in their encrypted form in the running
configuration.
The encryption algorithm is the same across switches. Encrypted passwords
may be copied from one switch and pasted into another switch configuration.
Command History
Updated in version 6.3.0.1 firmware.
Example
The following two examples globally configure the RADIUS server key for all
configured servers. The two examples are identical in effect.
console(config)#radius-server key "This is a key string"
console(config)#radius-server key 0 "This is a key string"
radius-server retransmit
Use the radius-server retransmit command to specify the number of times
the RADIUS client will retransmit requests to the RADIUS server. To reset
the default configuration, use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
•
retries — Specifies the retransmit value. (Range: 1–10)
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
929
Security Commands
Advertisement
Table of Contents
