Show Storm-Control - Dell N1100-ON Reference Manual

show storm-control

Use the show storm-control command to display the configuration of storm
control.
Syntax
show storm-control [all | {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
The following example shows storm control configurations for a Gigabit
Ethernet port. The second example shows flow control mode status.
console#show storm-control
802.3x Flow Control Mode....................... Disable
console#show storm-control gigabitethernet 1/0/1
Bcast
Intf Mode
---------- -------- --------- -------- --------- -------- --------- --------
Gi1/0/1 Disable
switch-top(config)#show storm-control all
Bcast
Port Mode
---------- -------- --------- -------- --------- -------- --------- --------
Gi1/0/1 Enable
Bcast Mcast
Level Mode
5 Disable
Bcast Mcast
Level Mode
90 Enable
Mcast Ucast
Level Mode
5 Disable
Mcast Ucast
Level Mode
5 Enable
Layer 2 Switching Commands
Ucast Flow
Level Ctrl
5 Disabled
Ucast Flow
Level Ctrl
10 Enabled
414