User Guidelines
•
Use the port storm-control broadcast enable Interface Configuration mode command to
enable broadcast storm control.
Example
The following example configures the maximum broadcast rate 10 packets per second.
console(config)# port storm-control broadcast rate 10
show ports storm-control
The show ports storm-control Privileged EXEC mode command displays the storm control
configuration.
Syntax
show ports storm-control [ethernet interface]
•
interface — A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
console# show ports storm-control
Port
-----
g11
g12
g13
g14
g15
g16
118
Ethernet Configuration Commands
Broadcast Storm control [packets/sec]
-------------------------------------
333
Disabled
333
Disabled
Disabled
333