Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1005

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Chapter 37: EX4200 Virtual Chassis—Overview, Components, and Configurations
Figure 10: Management Ethernet Port Redirection to the VME Interface
If the master management Ethernet link is unavailable, the session is redirected through
the backup management Ethernet link. If there is no active management Ethernet link
on the backup, the VME interface chooses a management Ethernet link on one of the
linecard members, selecting the linecard member with the lowest member ID as its first
choice.
You can configure an IP address for the VME global management interface at any time.
You can perform remote configuration and administration of all members of the Virtual
Chassis configuration through the VME interface.
Understanding EX4200 Virtual Chassis Components on page 893
Example: Configuring an EX4200 Virtual Chassis with a Master and Backup in a Single
Wiring Closet on page 917
901