Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 972

Complete Software Guide for Junos
Required Privilege
Level
List of Sample Output
Output Fields
868
®
OS for EX Series Ethernet Switches, Release 10.4
—(EX4200 switches only) (Optional) Display directory information for the local
local
Virtual Chassis member.
member member-id —(EX4200 switches only) (Optional) Display directory information
for the specified member of the Virtual Chassis configuration. Replace
with a value from 0 through 9.
—(Optional) Path or root directory to traverse.
path
—(TX Matrix router only) (Optional) Display directory information for the TX Matrix
scc
router (or switch-card chassis).
sfc number —(TX Matrix Plus router only) (Optional) Display directory information for the
TX Matrix Plus router (or switch-fabric chassis). Replace number with
view
show system directory-usage scc (TX Matrix Router) on page 869
show system directory-usage sfc (TX Matrix Plus Router) on page 869
Table 145 on page 868 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Table 145: show system directory-usage Output Fields
Field Name
bytes
directory-name
Field Description
Number of bytes used by files in a directory.
Name of the directory.
member-id
.
0
show system directory-usage
Copyright © 2010, Juniper Networks, Inc.