Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 971

show system directory-usage
Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show system directory-usage
<depth number>
<path>
show system directory-usage
<all-members>
<depth number>
<local>
<member member-id>
<path>
show system directory-usage
<all-chassis | all-lcc | lcc number | scc>
<depth number>
<path>
show system directory-usage
<all-chassis | all-lcc | lcc number | sfc number>
<depth number>
<path>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Display directory usage information.
none —Display all directory usage information.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display directory
all-chassis
usage information about all the T640 routers (in a routing matrix based on a TX
Matrix router) or T1600 routers (in a routing matrix based on a TX Matrix Plus router)
in the chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-lcc
display directory information for all T640 routers (or line-card chassis) connected
to the TX Matrix router. On a TX Matrix Plus router, display directory information for
all T1600 routers (or line-card chassis) connected to the TX Matrix Plus router.
all-members —(EX4200 switches only) (Optional) Display directory information for all
members of the Virtual Chassis configuration.
depth number —(Optional) Depth of the directory to traverse. This option is useful when
you want to limit the output shown for a large file system.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display directory information for a specific T640 router that is connected to the TX
Matrix router. On a TX Matrix Plus router, display directory information for a specific
T1600 router that is connected to the TX Matrix Plus router. Replace
value from through
0
Chapter 36: Operational Commands for System Monitoring
.
3
number with a
867