Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 838

Complete Software Guide for Junos
Table 132: show chassis fpc Output Fields (continued)
Field Name Field Description
Temperature of the air passing by the FPC, in degrees Celsius or in both Celsius
Temp (C) or
and Fahrenheit.
Temperature
Total percentage of CPU being used by the FPC's processor.
Total CPU
Utilization (%)
Of the total CPU being used by the FPC's processor, the percentage being used
Interrupt CPU
for interrupts.
Utilization (%)
Total DRAM, in megabytes, available to the FPC's processor.
Memory DRAM
(MB)
Percentage of heap space (dynamic memory) being used by the FPC's processor.
Heap Utilization
If this number exceeds 80 percent, there may be a software problem (memory
(%)
leak).
Percentage of buffer space being used by the FPC's processor for buffering
Buffer Utilization
internal messages.
(%)
Amount of DRAM available to the FPC's CPU.
Total CPU DRAM
Amount of reduced latency dynamic random access memory (RLDRAM)
Total RLDRAM
available to the FPC CPU.
Amount of double data rate dynamic random access memory (DDR DRAM)
Total DDR DRAM
available to the FPC CPU.
Amount of static RAM (SRAM) used by the FPC's CPU.
Total SRAM
Total amount of memory used for storing packets and notifications.
Total SDRAM
I/O Manager version number, manufacturer, and part number.
I/O Manager ASICs
information
Time when the Routing Engine detected that the FPC was running.
Start time
How long the Routing Engine has been connected to the FPC and, therefore,
Uptime
how long the FPC has been up and running.
PIC type ( pic-status
show chassis fpc (M10 show chassis fpc (M10
Router) Router)
734
®
OS for EX Series Ethernet Switches, Release 10.4
output only) Type of PIC.
user@host> show chassis fpc
FPC status:
Temp
Slot State (C)
0 Online 27
1 Online 28
Level of Output
all levels
all levels
none specified
none specified
none specified
none specified
detail
detail
detail
detail
detail
detail
detail
detail
none specified
Copyright © 2010, Juniper Networks, Inc.