Table 134: Show Chassis Hardware Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 134: show chassis hardware Output Fields

Field Name Field Description
Chassis component:
Item
(EX Series switches)—Information about the chassis, Routing Engine (SRE
and RE modules in EX8200 switches), power supplies, fan trays, and LCD
panel. Also displays information about Flexible PIC Concentrators (FPCs)
and associated Physical Interface Cards (PICs). Information about the
backplane, midplane, and SIBs (SF modules) is displayed for EX8200
switches. See EX Series Switches Hardware and CLI Terminology Mapping .
(MX Series routers)—Information about the backplane, Routing Engine, Power
Entry Modules (PEMs), and fan trays. Also displays information about Flexible
PIC Concentrators (FPCs) and associated Physical Interface Cards (PICs),
Modular Port Concentrators (MPCs) and associated Modular Interface Cards
(MICs), or Dense Port Concentrators (DPCs). MX80 routers have a single
Routing Engine and a built-in Packet Forwarding Engine (PFE) that attaches
directly to MICs. The PFE has two "pseudo" FPCs (FPC 0 and FPC1). MX80
routers also have a Forwarding Engine Board (FEB).
(M Series routers, except for the M320 router)—Information about the
backplane; power supplies; fan trays; Routing Engine; maxicab (the connection
between the Routing Engine and the backplane, for the M40 router only);
SCB, SSB, SFM, or FEB; MCS and PCG (for the M160 router only); each FPC
and PIC; and each fan, blower, and impeller.
(M120, M320, and T Series routers)—Information about the backplane, power
supplies, fan trays, midplane, FPM (craft interface), CIP, PEM, SCG, CB, FPC,
PIC, SFP, SPMB, and SIB.
Revision level of the chassis component.
Version
Part number of the chassis component.
Part number
Serial number of the chassis component. The serial number of the backplane
Serial number
is also the serial number of the router chassis. Use this serial number when you
need to contact Juniper Networks Customer Support about the router chassis.
or (
Assb ID extensive
Assembly ID
(
FRU model number clei-models
hardware component.
(
CLEI code clei-models
Identifier code. This value is displayed only for hardware components that use
ID EEPROM format v2. This value is not displayed for components that use ID
EEPROM format v1.
ID EEPROM version used by hardware component:
EEPROM Version
(version 2).
Description Brief description of the hardware item:
Type of power supply.
Type of PIC. If the PIC type is not supported on the current software release,
the output states
Copyright © 2010, Juniper Networks, Inc.
keyword only) Identification number that describes the FRU hardware.
, , and keyword only) Model number of FRU
extensive models
and keyword only) Common Language Equipment
extensive
Hardware Not Supported
Chapter 36: Operational Commands for System Monitoring
(version 1) or
0x01 0x02
Level of Output
All levels
All levels
All levels
All levels
extensive
none specified
none specified
extensive
All levels
747