Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 934

Complete Software Guide for Junos
show pfe statistics ip6
Syntax
Syntax (TX Matrix and
TX Matrix Plus Router)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
830
®
OS for EX Series Ethernet Switches, Release 10.4
show pfe statistics ip6
<icmp>
show pfe statistics ip6
<fpc slot>
<icmp>
< lcc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Packet Forwarding Engine IPv6 statistics.
none —Display all Packet Forwarding Engine IPv6 statistics.
—(TX Matrix and TX Matrix Plus router only) (Optional) Display statistics for a
fpc slot
Flexible PIC Concentrator slot. On a TX Matrix router, if you specify the number of a
T640 router by using the
with a value from
slot 0
. Likewise, on a TX Matrix Plus router, if you specify the number of a T1600 router
31
by using the lcc number option (the recommended method), replace
from through . Otherwise, replace
0 7
the following commands have the same result:
user@host> show pfe statistics ip6 fpc 1 lcc 1
user@host> show pfe statistics ip6 fpc 9
—(Optional) Display Packet Forwarding Engine IP ICMP statistics.
icmp
—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
lcc number
display statistics for a specific T640 router (or line-card chassis) that is connected
to the TX Matrix router. On a TX Matrix Plus router, display statistics for a specific
T1600 router (or line-card chassis) that is connected to the TX Matrix Plus router.
Replace with a value from
number
admin
show pfe statistics ip6 icmp on page 831
show pfe statistics ip6 lcc on page 832
Table 141 on page 831 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
lcc number option (the recommended method), replace
through . Otherwise, replace
7
with a value from
slot
through .
0 3
show pfe statistics ip6
with a value from through
slot 0
slot with a value
through . For example,
0 31
command.
Copyright © 2010, Juniper Networks, Inc.