Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 848

Complete Software Guide for Junos
show chassis hardware
Syntax
Syntax (EX Series
Switches)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
744
®
OS for EX Series Ethernet Switches, Release 10.4
show chassis hardware
<clei-models | detail | extensive | models>
show chassis hardware
<clei-models>
<detail | extensive>
<models>
show chassis hardware
<clei-models>
<detail | extensive>
<models>
<lcc number | scc>
show chassis hardware
<clei-models>
<detail | extensive>
<models>
<lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
option introduced in Junos OS Release 8.2.
models
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display a list of all Flexible PIC Concentrators (FPCs) and PICs installed in the router or
switch chassis, including the hardware version level and serial number.
In EX Series switch command output, FPC refers to the following:
On EX2200 switches, EX3200 switches, EX4200 standalone switches, and EX4500
switches—Refers to the switch; FPC
On EX4200 switches in a Virtual Chassis configuration—Refers to the member of a
Virtual Chassis; FPC number
On EX8208 and EX8216 switches—Refers to a line card; FPC
number for the line card.
—Display information about hardware. For a TX Matrix router, display information
none
about the TX Matrix router and its attached T640 routers. For a TX Matrix Plus router,
display information about the TX Matrix Plus router and its attached T1600 routers.
—(Optional) Display Common Language Equipment Identifier (CLEI) bar
clei-models
code and model number for orderable field-replaceable units (FRUs).
detail —(Optional) Include RAM and disk information in output.
—(Optional) Display ID EEPROM information.
extensive
is always 0.
number
equals the member ID, from 0 through 9.
Copyright © 2010, Juniper Networks, Inc.
equals the slot
number