Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 931

show pfe statistics ip
Syntax
Syntax (TX Matrix and
TX Matrix Plus Router)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show pfe statistics ip
<icmp | options>
show pfe statistics ip
<fpc slot>
<icmp | options>
<lcc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display IPv4 Packet Forwarding Engine statistics.
none —Display all IPv4 Packet Forward Engine statistics.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display statistics for a
fpc slot
Flexible PIC Concentrator (FPC) slot. On a TX Matrix router, if you specify the number
of a T640 router by using the
with a value from
slot
number of a T1600 router by using the
replace slot with a value from
through . For example, the following commands have the same result:
0 31
user@host> show pfe statistics ip fpc 1 lcc 1
user@host> show pfe statistics ip fpc 9
icmp —(Optional) Display Packet Forwarding Engine IP ICMP statistics.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display error statistics for a specific T640 router (or line-card chassis) that is
connected to a TX Matrix router. On a TX Matrix Plus router, display error statistics
for a specific T1600 router (or line-card chassis) that is connected to a TX Matrix
Plus router. Replace
number
options —(Optional) Display Packet Forwarding Engine IP options statistics.
admin
show pfe statistics ip icmp on page 828
show pfe statistics ip options on page 829
Table 140 on page 828 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 36: Operational Commands for System Monitoring
lcc number option (the recommended method), replace
through . On a TX Matrix Plus router, if you specify the
0 7
option (the recommended method),
lcc number
0 through 7 . Otherwise, replace
with a value from
0
show pfe statistics ip
slot with a value from
through .
3
command. Output
827