Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 900

Complete Software Guide for Junos
show chassis pic show chassis pic
fpc-slot pic-slot fpc-slot pic-slot
796
®
OS for EX Series Ethernet Switches, Release 10.4
Table 137: show chassis pic Output Fields (continued)
Field Name
Package
PIC Port Information
Port Number
Cable Type
PIC Port Information
(MX960 Router
Bidirectional Optics)
PIC Port Information
(next-generation
SONET/SDH SFP)
user@host> show chassis pic fpc-slot 2 pic-slot 0
PIC fpc slot 2 pic slot 0 information:
Type
ASIC type
State
PIC version
Uptime
PIC Port Information:
Port Cable
Number Type
0 GIGE 1000LX
6 GIGE 1000LX
Field Description
(MultiServices PICs only) Services package supported:
.
Layer-3
Port-level information for the PIC.
Port number for the PIC.
Type of cable connected to the port:
Port-level information for the PIC.
Port—Port number
Cable type—Type of small form-factor pluggable (SFP) optical
transceiver installed. Uplink interfaces display -U. Down link
interfaces display -D.
Fiber type—Type of fiber. SM is single-mode.
Xcvr vendor—Transceiver vendor name.
Xcvr vendor part number—Transceiver vendor part number.
BX10-10-km bidirectional optics.
BX40-40-km bidirectional optics.
SFP-LX-40-km SFP optics.
Wavelength—Wavelength of the transmitted signal. Uplinks are
always 1310 nm. Downlinks are either 1490 nm or 1550 nm.
Port-level information for the next-generation SONET/SDH SFP
PIC.
Port—Port number
Cable type—Type of small form-factor pluggable (SFP) optical
transceiver installed.
Fiber type—Type of fiber: SM
Xcvr vendor—Transceiver vendor name.
Xcvr vendor part number—Transceiver vendor part number.
Wavelength—Wavelength of the transmitted signal.
Next-generation SONET/SDH SFPs use 1310 nm.
10x 1GE(LAN), 1000 BASE
H chip
Online
1.1
1 day, 50 minutes, 58 seconds
Layer-2
, , or
LH LX SX
(single-mode) or MM (multimode).
Copyright © 2010, Juniper Networks, Inc.
or