Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 922

Complete Software Guide for Junos
show pfe next-hop
Syntax
Syntax (TX Matrix and
TX Matrix Plus router)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
818
®
OS for EX Series Ethernet Switches, Release 10.4
show pfe next-hop
<interface interface-name>
show pfe next-hop
<fpc slot>
<interface interface-name>
<lcc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Packet Forwarding Engine next-hop information.
none —Display all Packet Forwarding Engine next-hop information.
—(TX Matrix and TX Matrix Plus router only) (Optional) Show the next hops for
fpc slot
a Flexible PIC Concentrator (FPC) slot.
On a TX Matrix router, if you specify the number of a T640 router by using the
number option (the recommended method), replace
7 . Otherwise, replace slot
if you specify the number of a T1600 router by using the
recommended method), replace
replace with a value from
slot
have the same result:
user@host> show pfe next-hop fpc 1 lcc 1
user@host> show pfe next-hop fpc 9
interface interface-name —(Optional) Display the Packet Forwarding Engine next-hop
interface.
—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
lcc number
the slot number of the T640 router (or line-card chassis) that houses the FPC. On
a TX Matrix Plus router, the slot number of the T1600 router (or line-card chassis)
that houses the FPC. Replace
admin
show pfe next-hop on page 819
show pfe next-hop fpc (TX Matrix Router) on page 819
show pfe next-hop fpc (TX Matrix Plus Router) on page 819
with a value from 0 through
slot with a value from
through . For example, the following commands
0 31
with a value from
number
Copyright © 2010, Juniper Networks, Inc.
lcc
with a value from through
slot 0
31 . On a TX Matrix Plus router,
number option (the
lcc
0 through 7 . Otherwise,
through .
0 3