NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Figure 7-3
b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. Now 1/0/2 appears in the Interface field at the top.
c.
Under the IP Interface Configuration, enter the following information.
•
In the IP Address field, enter 192.150.2.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
2. Assign IP address 192.150.3.1/24 to the interface 1/0/3.
7-4
v1.0, October 2009
Routing Information Protocol