NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Next to the Administrative Mode, select the Enable radio button.
c.
Click Apply to save settings.
5. Configure dot1x authentication list.
a.
From the main menu, select Security > Management Security > Authentication List> Dot1x
Authentication List. A screen similar to the following displays.
Figure 15-27
b. Select the defaultList checkbox.
c.
Select RADIUS in the 1 field.
d. Click Add.
6. Configure the RADIUS authentication server.
a.
From the main menu, select Security > Management Security > Radius>Server Configuration. A
screen similar to the following displays.
Figure 15-28
Security Management
v1.0, October 2009
15-25