NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 28-41
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply.
2.
Configure 1/0/1 as a routing port and assign IP address to it.
a.
From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-42
b. Under IP Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for 1/0/1.
1/0/1 now appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration.
•
In the IP address, enter 192.168.2.2.
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
3.
Configure 1/0/9 as a routing port and assign IP address to it.
28-33
v1.0, October 2009
PIM