NETGEAR Managed Switches Software Administration Manual, Release 8.0
Web Interface Procedure: Assigning a MAC-Based VLAN
To use the Web interface to configure the managed switch, proceed as follows:
1.
Create VLAN 3.
a.
From the main menu, select Switching > VLAN >Basic > VLAN configuration. A screen similar to
the following displays.
Figure 3-10
b. Enter the following information in the VLAN Configuration.
•
In the VLAN ID field, enter 3
•
In the VLAN Name field, enter VLAN3
•
Select Static in the VLAN Type field.
c.
Click Add
2. Assign ports to VLAN 3.
a.
From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 3-11
Virtual LANs
v1.0, October 2009
3-10