NETGEAR FSM7328SNA Administration Manual page 205

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Web Interface: Configuring ACL Mirroring
To use the Web interface to configure IP ACL on a port on the switch, proceed as follows:
1. Create an IP access control list with the name monitorHost on the switch:
a. From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 11-49
b. In the IP ACL ID field, enter monitorHost.
c. Click Add to create ACL monitorHost and the following screen displays:
Figure 11-50
2. Create a rule to match the host 10.0.0.1 in the ACL monitorHost.
Access Control Lists (ACLs)
v1.0, October 2009
11-45