NETGEAR FSM7328SNA Administration Manual page 313

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Force the 1/0/6 to be authorized for it connects to the RADIUS server.
(Netgear Switch) #show dot1x detail 1/0/5
Port........................................... 1/0/5
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Authenticated
Backend Authentication State................... Idle
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 0
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
VLAN Id........................................ 2000
VLAN Assigned Reason........................... RADIUS
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... FALSE
Key Transmission Enabled....................... FALSE
Control Direction.............................. both
Maximum Users.................................. 16
Unauthenticated VLAN ID........................ 0
Session Timeout................................ 0
Session Termination Action..................... Default
To use the Web interface to do VLAN assignment via RADIUS, proceed as follows:
1. Assign IP address for management interface.
a. From the main menu, select System > Management >Network Interface > IPv4 Network
Configuration. A screen similar to the following displays.
Security Management
v1.0, October 2009
15-29