NETGEAR FSM7328SNA Administration Manual page 124

NETGEAR Managed Switches Software Administration Manual, Release 8.0
• In the IP Address field, enter 192.168.20.1.
• In the Network Mask field, enter 255.255.255.0.
• Select Enable in the Admin Mode field.
d. Click Apply to save the settings.
4. Specify the Router ID and Enable OSPF for the switch.
a. From the main menu, select Routing > OSPF > Basic> OSPF Configuration. A screen similar to the
following displays.
Figure 8-20
b. Under the OSPF Configuration, enter the following information:
In the Router ID, enter 1.1.1.1.
c. Click Apply to save the settings.
5. Enable OSPF on the port 2/0/11.
a. From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 8-21
8-19
v1.0, October 2009
OSPF