NETGEAR Managed Switches Software Administration Manual, Release 8.0
d. Click Apply. At the end of this configuration a screen similar to the following displays.
Figure 15-65
3.
Configure the port through which DHCP server is reached as trusted. Here interface 1/0/1 is trusted.
a.
From the main menu, select Security > Control > DHCP Snooping Interface Configuration. A
screen similar to the following displays. "
Figure 15-66
b. Select the checkbox for Interface 1/0/1.
c.
Set the Trust Mode as Enable for Interface 1/0/1.
d. Click Apply. At the end of this configuration a screen similar to the following displays.
Figure 15-67
Security Management
v1.0, October 2009
15-53