NETGEAR FSM7328SNA Administration Manual page 218

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Web Interface: Configuring an IPv6 ACL
1. Create the Access Control List with the name ipv6-acl
a. From the main menu, select Security > ACL > Advanced > IPv6 ACL.
b. In the IPv6 ACL table, enter ipv6-acl in the IPv6 ACL field. A screen similar to the following
displays.
Figure 11-69
c. Click Add. At the end of this configuration a screen similar to the following displays.
Figure 11-70
2. Define the first rule (1 of 3).
11-58
v1.0, October 2009
Access Control Lists (ACLs)